Biomechanic and Biomedical Materials- Research Project PDF Print E-mail

  1. Orthopaedic biomechanics
  2. Craniofacial & dentistry
  3. Biomedical materials
  4. Biofluid dynamics

 


 

Orthopaedic Biomechanics

Wrist

  1. Mohd Nazri bin Bajuri, “Development of Implant for Total Wrist Arthropalsty.” July 2009 - present.
  2. Mohd Azley bin Mat Saat, “Design and Analysis of a Human Wrist Joint Simulator. 2009-2010.
  3. Mohammad Fathi bin Halim, “Wrist Joint Tribo-Simulator. 2009-2010.

Spine

  1. Mohd Fadhli bin Miskon, “Finite Element Analysis of the Effect of Cross-link for Posterior Instrumentation of Thoracolumbar Burst Fracture.” February 2010 - present.
  2. Saturnino Saldanha, “Comparison of Various Posterior Instrumentation Designs in Unstable Burst Fracture l1: A Biomechanical Study.” February 2010 - present.
  3. Nor Raihanah binti Abdull Rahim, “Biomechanical Analysis of the Spinal Column with Intervertebral Disc Replacement.” July 2009 - present.
  4. Mina Alizadeh, “Biomechanical Evaluation of Rigid and Dynamic Stabilization Devices for the Lumbar Spine.” December 2009 – present.
  5. Amirul Hakim bin Rahim, “Design and Analysis of a Human Spine Simulator. 2009-2010.
  6. Yeoh Swee Aik, “Finite Element Analysis of Lumbar with Total Disc Arthroplasty. 2009-2010.
  7. Wan Mohd Musyris b. Wan Harujan, “Modelling and Biomechanical analysis of Human Vertebral Column with emphasis on the intervertebral Disc (IVD).” 2007-2008.

Elbow

  1. Milad Heidari, “Development of Elbow Implant for Total Elbow Athroplasty.” December 2009 – present.
  2. Muhammad Safuan bin Husin, “Design and Analysis of a Human Elbow Joint Simulator. 2009-2010.
  3. Khairul Shahri bin Abdul Rokib, “Design and Analysis of Implant for Total Elbow Replacement. 2009-2010.
  4. Muhammad Firdaus bin Zakaria, “Elbow Joint Tribo Simulator. 2009-2010.
  5. Muhammad Hafiz bin Abdullah, “Design of an Elbow Prosthesis for Total Elbow Replacement.” 2006-2007.
  6. Mohd Fairoz bin Saharudin, “Stress Analysis of the joint in-constrained and Semi-constrained total elbow implants.” 2007-2008.

Acetabular Cup

1. Mohd Azali Azmir, The Effect of Press Fit on Osseointegration of Acetebular Cup.” 2008-2009.

2. Muhsin bin Salim, “Stability of Acetabular Cup for Osseointegration.” 2007-2008.

Shoulder

1. Wong Leong Ping, “Design and Analysis of a Human Shoulder Joint Simulator. 2009-2010.

2. Faisal Abidin Lee, “Design & Analysis of Total Shoulder Arthroplasty.” 2006-2007.

3. Alhamzee bin Idrose, “Comparison between Conventional and Reversed Shoulder Implant for Total Shoulder Arthroplasty.” 2007-2008.

Hip

  1. Mohd Yusof Baharudin, “Development of Hip Stem for Total Hip Arthroplasty Suitable for Asian Population.” June 2008 - present.
  2. Abdul Halim bin Abdullah, “Finite Element Analysis of Cemented and Cementless Total Hip Arthroplasty.” July 2006 – July 2008.
  3. Haslina Abdullah, “Biomechanical Analysis of Cemented and Cementless Hip Stem.” June 2008 - present.
  4. Wong King Jye, “Micromotion and Stability of Cemented and Cementless Femoral Stems.” July 2006 – July 2007.
  5. Tan Wee Yee, “Design and Analysis of a Human Hip Joint Simulator” 2009-2010.
  6. Sim Jia Siang, “Developing a Miniaturize Human Hip Joint Simulator for Joint Tribological Study. 2009-2010.
  7. Eunice Chung Siaw Kiat, “Design and Analysis of a Cemented Hip Prosthesis.” 2006-2007.
  8. Norhayati Mohlisun, “Interface Micromotion failure simulation on cementless hip arthroplasty.” 2007-2008

Cancellous Bone

  1. Ardiyanshah Syahrom, “Biomimetic Design and Fabrication of Load Bearing Tissue Scaffold for Stem Cell Tissue Regeneration.” October 2007 - present.
  2. Zolqernine Othman, “Development of Intelligent Classifier for Cancellous Bone Structure.” June 2008 - present.
  3. Yuslinda Mad Yusop, “Modelling and Failure Analysis of Cancellous Bone.” June 2008 - present.
  4. Mohd Azrul Rais Yusof, “Human Cancellous Bone as a Structure for Stem Cell: Micro modeling and Analysis.” 2007-2008

Knee

  1. Mahmood Anwar, “Fabrication of Specialised High Flex Knee Implant Fortified by Nanocrystalline Diamond Coatings.” December 2009 - present.
  2. Fitdriyah binti Hussain, “Development of High Flex Knee Implant for Malaysian Population.” July 2009 - present.
  3. Ali Fallahi Arezoodar, “Development of High Flexion Knee Implant for Asian Population.” July 2009 – present.
  4. Loy Heng Chen, “Design and Analysis of a Human Knee Joint Simulator. 2009-2010.
  5. Noor Hidayah bin Amir Hassan, “Comparative Study of Implant for Total and Partial Knee Replacement. 2009-2010.
  6. Ahmad Zazily bin Abdul Aziz, “Knee Joint Tribo-Simulator. 2009-2010.
  7. Nor Hidayat Tay bin Khairul Azmi Tay, “Mobile Bearing For the treatment of Osteorthritic of the knee.” 2008-2009
  8. Mohd Hafizuddin bin M Marzuki, “Design and Analysis of a Unicompartmental Knee implant for Osteoarthritic Patient”. 2007-2008.
  9. Zaliha bt. Aziz, “Defect of a Medial Condyle: Design and Analyses of a Unicompartmental Artificial Knee.” 2007-2008

Ankle

  1. Hafizah binti Haron, “The Effectiveness of Ankle Weight in Human Gait Transition.” January 2010 - present.
  2. Muhamad Syafiq bin Sulaiman, “Ankle Joint Tribo Simulator. 2009-2010.
  3. Timothy Thomas, “Micromotion and stability of Single Fin Total Ankle Replacement.” 2007-2008.
  4. Hakimah bt. Sabudin, “Micromotion and Stability of Single Fin and Double Fin Total Ankle Replacement.” 2007-2008.

Finger

  1. Nor Raihanah Abdull Rahim, “Design and analysis of Metacarpophalangeal implants to relieve pain due to osteoarthritis.” 2008-2009.
  2. Muhammad Azuwan bin Aminullah, “Design and Analysis of Metacarpophalangeal Joints to Relieve Pain due to Osteoarthritis”. 2007-2008

Craniofacial & Dentistry

Zygomatic

  1. Muhammad Ikman bin Ishak, “Development of Implant for Zygomatic Fracture With and Without Dental Bridges.” Dec 2009 - present.

TMJ

  1. Wan Nur Afiza binti Wan Anuar, “Biomechanical Evaluation of Temporomandibular Joint Implant. 2009-2010.

Dental

  1. Syafiqah binti Saidin, “Development of Mechanical Interlock Dental Prosthesis with Hydroxyapatite/Silver/Titania Thin Film Coating.” July 2009 - present.
  2. Aisyah binti Ahmad Shafi, “The Effect of Abutment-Implant Connections to Stability and Load Transfer in Dental Prosthesis.” July 2009 - present.
  3. Jamal Kashani, “Development of Computer Aided Tools as Surgical Guide in Dental Surgery.” January 2010 - present.
  4. Ong Kheng Chuan, “Biomechanical Analysis of Dental Implant with Mechanical Interlock. 2009-2010.
  5. Mohd Faiz bin Mohd Yusoff, “Design and Analysis of Mechanical Interlock in Prosthetic Dentistry. 2009-2010.
  6. Mohd Norshahid b. Mohd Idris, “Mechanical Interlocking mechanism of Prototype Dental Implant Body.” 2005-2006.
  7. Ahmad Ihsan bin Zainuddin, “Mechanical Interlocking Mechanism between the Abutment Set and the Dental Implant Body.” 2007-2008

Trauma

  1. Raja Mohd Aizat bin Raja Izaham, “Biomechanical Evaluation of Fracture Fixation Construct of the Lower Limb.” July 2009 - present.
  2. Muhammad Lutfi bin Idris, “Biomechanical Analysis of Locking Compression Plate in Oblique Tibial Fracture. 2009-2010.

Miniplates

  1. Norazhar b. Nordin, “Numerical Analysis of Plates and Screw System for Fracture Fixation of the Mandible.” 2007-2008.

Biomedical Materials

Bioglass

  1. Farnaz Naghizadeh, “Development of Bioglass for Biomedical Applications.” December 2009 - present.

Elastomer

  1. Ahmad Ali Bin Mohamad, “Development of Biodegradable Elastomer/Calcium Phosphate Synthetic Ligament Graft for Potential Use in Ligament Reconstruction. 2010 – present.

Hydroxyapatite

  1. Andril Arafat Suhasril, “Development of Hydoxyapatite Biomimetic Coating of Biomedical Grade Metallic Implant using Investment Casting Technique.” June 2008 - present.
  2. Mazatusziha Ahmad, “Development of Ultra High Molecular Weight Polyethylene Hydroxyapatite Biocomposite for Medical Applications.”June 2008 - present.
  3. Amirhossein Goharian, “Development of Polyetheretherketone Hydroxyapatite for Load Bearing Joint Implants.” Jan 2009 - present.
  4. Muhamad Rasyidi Husin, “Montmorillonite Reinforced High Density Polyethylene/Hydroxyapatite for Biomedical Application.” June 2008 - present.
  5. Ahmad Ramli bin Rashidi, “Development of Polyetheretherketone/ Hydroxyapatite Bioactive Composite for Load Bearing Bone Aanalogue.” July 2009 - present.
  6. Amir Fereidouni Lotfabadi, “Investigation on the Quality of Hydroxyapatite Adhesion on Investment Casting Mould.” July 2007 - July 2008.
  7. Hessam Majd, “The Effect of Pouring Temperature on the Diffusion of Hydroxyapatite onto Bio-metallic material.” July 2007 - July 2008.

Tribometer

  1. Choo Che How, “Modification and Manufacture of an existing Tribometer for Wear Analysis of Artificial Human Joint.” 2008-2009.
  2. Tang Yong Cang, “Design and Development of a Mechanical System for New Tribometer.” 2008-2009.
  3. Stephanie Clarence Mannie, “Development of Human Joint Simulator for Joint Tribological Study.” 2007-2008.

Ti-6Al-4V

  1. Mahfodzah Md. Padzi, “Biotribocorrosion behaviour of Ti-6Al-4V and 316L Stainless Steel for Biomedical Applications.” July 2008 – July 2009.
  2. Jamillah Amer Nordin, “Corrosion Behaviour of Ti6V4Al in Simulated Body Fluid.” 2006-2007.
  3. Corolyn @ Norsafikah bt. Jamli, “Electrochemical study of Ti-6Al-4V and 316L under Simulated Bodily Fluid.” 2007-2008.

CoCrMo

  1. Sharqiyah Abdul Malick, “Tribological Behaviour of High Carbon and Low Carbon Cobalt Chrome Molybdenum Alloy for Biomedical Applications.” June 2008 - present.
  2. Norsamsiah binti Muhammad @Wahab, “Cytotoxicity Comparison of Clinically Relevant High Carbon and Low Carbon Cobalt Chromium Molybdenum Alloys Wear Particles In Vitro July 2008 - present.
  3. Juliawati Alias, “Biotribocorrosion behaviour of High Carbon and Low Carbon CoCrMo for Biomedical Applications.” July 2008 – July 2009.
  4. Nur Syahirah bt. Mohd Shah, “Electrochemical Study of CoCrMo and 304SS under Simulated Body Fluid.” 2007-2008.

Biofluid Dynamics

Cardiovascular

  1. Badreddin Giuma Elghariani, “Early Warning Detection of the Risk of Rupture of the Abdominal Aortic Aneurysm using the Fluid Structure Interaction Technique.” June 2008 - present.
  2. Mohd Imran bin Rosly, “Modeling Flow Stream of Blood Due to Abdominal Aortic Aneurysm.” 2007-2008.
  3. Vijayajothi a/l Paramasivam, “Fluid Flow through Abdominal Aortic Aneurysm.” March 2009 - present.
  4. Iskhrizat bin Taib, “Fluid Structure Interaction Technique for Predicting Rupture of Abdominal Aortic Aneurysm.” December 2007 - present.

Cardiothoracic

  1. Nasrul Hadi bin Johari, “The Effects of Cartilage Rings on Simulated Airflow through the Trachea and Main Bronchi.” June 2009 - present.
  2. Muhd Hafiz b. Abdul Hamid, “Effects of Varying Stent Geometry on its Expansion Behaviour Using Finite Element Method.” 2007-2008.

ORL

  1. Mohd Nazmin Bin Maslan, Three Dimensional Reconstruction and Fluid Flow Simulation for Pre and Post Functional Endoscopic Sinus Surgery with and without localized Stenosis.” 2010 – present.

Vascular

  1. Jamillah Amer Nordin, “Three Dimensional Reconstruction and Fluid Flow Simulation through the Radiocephalic Arteriovenous Fistula with and without localized Stenosis.” 2010 – present.